BMW Passenger Restraint System Bypass – How to Do it

A modification or workaround that disables or bypasses the passenger restraint system in a BMW car is referred to as a “BMW Passenger Restraint System Bypass”. People who want to disable or deactivate the airbag system for a variety of reasons frequently do this on purpose.

What Exactly Is The Passenger Restraint System?

BMW Passenger Restraint System Bypass
Dashboard Light Indicates PRS Malfunction

In the case of an accident, the passenger restraint system will keep you secure. Airbags, wiring, and sensors make up this system.

Please be aware that the BMW seat belt is compatible with the passenger restraint system. In the case of a collision, airbags are not intended to be your only form of protection.

If you are not buckled up when you crash, you risk suffering life-threatening injuries.

The driver of a BMW will be far better protected if both the airbags and seat belt deploy than they would be if only one of them did.

What Are The Possible Causes Of A Seat Occupancy Mat Malfunction?

A warning message will show up on the BMW dashboard when there is a problem causing the passenger restraint system to malfunction. The notice will read:

A problem with the passenger restraint system can affect the airbag, the belt tensioner, or the belt force limiter.

A warning for a passenger restraint system should never be disregarded, unlike other cautions. The airbags are managed by this mechanism.

The airbags might not deploy if there is a problem and you are involved in a collision. This implies that you and any other car occupants are more likely to sustain injuries than if the airbags had actually deployed.

Components Are Damaged By a Water Leak

In a car, water may get into each and every place. It’s possible for the engine to leak water. The passenger restraint system might suffer severe damage from water.

Therefore, repair any broken parts right away. Metal parts will likely need to be replaced because water damage is good at degrading metal parts.

Battery Voltage Is Low

The passenger restraint system cannot operate if it receives sufficient electricity. There won’t be sufficient power for the sensors to collect data.

Additionally, the airbags won’t deploy with the same force that they should. So where does a low battery voltage come from? A faulty fuse or bad wiring could be the cause.

The Airbag Sensors Are Not Functioning.

Don’t disregard these problems if the airbag isn’t functioning or if its sensors aren’t sending the right information. The airbag and airbag sensor might need to be replaced.

The cost of replacing an airbag sensor is high. The price of the sensor alone might range from $50 to $300. Sensor replacement can cost up to $600 in total.

The Seat’s Inside Sensor Is Malfunctioning

The passenger airbag sensor is located between the driver and passenger seats in a BMW. The passenger restraint system requires a number of sensors in various locations throughout the car.

It facilitates collision detection. It will be more difficult for the system to determine when to deploy an airbag if the sensor inside the seat is malfunctioning.

BMW Passenger Restraint System Bypass Method

If you’re sick of the airbag or seatbelt warning light on your dashboard, using a BMW seat occupancy mat bypass could be an alternative way to solve the issue. This bypass system turns off the dashboard warning light that bothers you all the time. This will allow you to concentrate more on driving rather than worrying about the warning light on your dashboard.

Remember that it is your obligation to maintain the mechanical integrity of your car. By driving defensively, you should also make sure to always keep your passengers safe.

What is meant by BMW Passenger Restraint System Fuse?

BMW’s system for restraints for passengers the term “fuse” refers to a particular fuse in the fuse box of a BMW car that controls the electrical supply to the passenger restraint system. The passenger restraint system, sometimes referred to as the SRS or airbag system, is made up of a number of parts, including airbags, seat belt pretensioners, and crash sensors.

The electrical circuit that powers these safety components needs to be protected, which is what the passenger restraint system fuse is there for. The fuse is made to “trip,” or blow, in the case of a problem or an excessive electrical load. This breaks the circuit and guards against harm to the system or electrical components.

If the fuse for the passenger restraint system blows, there may be a malfunction with the system overall or an issue with one of the parts. To guarantee that the passenger restraint system performs as intended in the case of a collision, it is crucial to resolve the problem as soon as possible.

The exact location and specification of the passenger restraint system fuse can vary depending on the BMW model and year.

So how to find the Passenger restraint system fuse?

It can be challenging to find your way through the passenger restraint system’s maze of fuses. But you can complete it on your own. There are no specialized tools required.

Changing the fuse can resolve the issue if you believe the passenger restraint system alert is on as a result of a computer or sensor glitch.

You might also avoid having to pay hundreds of dollars in mechanic repairs. This person can also assist you in changing a burned-out fuse.

How to locate a burnt-out fuse is shown below.

When you start the car, the warning should show up on the dashboard. Open the trunk while the car is still running.

  • Find a schematic that shows which fuses connect to specific automotive parts and compartments. The list of fuses that are inside or behind the glove box is provided below.
  • Find the airbag component and note the fuse it has.
  • Then scroll down until you find two small boxes with the titles “fuse number” and “amps.”
  • Find the fuse number; the fuse to be found is indicated below in a column by the number.
  • Go to the fuse box now.
  • Check the air quality by opening the fuse box. Although it may seem unusual, occasionally you can smell when a fuse is burnt out.
  • Look for the fuse marked with the amperage. The correct answer is 20 if the amperes number is 20.
  • Examine the fuse after removing it. Replace the fuse if it appears to be burned out. However, it won’t constantly appear worn out. Replace the fuse with a new one if you believe that is the problem.
  • Replace the fuse with a new one, making careful to mark it with the same number that you used to remove the old fuse.

There are many tiny fuses involved, making it challenging to navigate the fuse box. But remain optimistic and take your time.

It is preferable to get guidance from someone you know who is a technician.

About The Author

Avatar for Ibrar Ayyub

Ibrar Ayyub

I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough research and presenting information in a structured and logical format.

Follow Us:
All About Cars News Gadgets >> Auto Repair >> BMW Passenger Restraint System Bypass – How to Do it
Scroll to Top